Mô đun Abb AI830A

ABB 3BSE040662R1

Thông số kỹ thuật module đầu vào Abb AI830A
đại lý AI830A | nhà phân phối AI830A

3-wire connection to RTDs

Inputs are monitored for open-circuit, shortcircuit and has a input grounded sensor

Thông số kỹ thuật chung module truyền thông Abb

Mã đặt hàng	3BSE040662R1
Type	Analog Input
Signal specification	3-wire RTD: Pt100, Cu10, NI100, Ni120 and resistive potentiometer
Số kênh	8
Signal type	See table in S800 Modules and Termination Units, 3BSE020924
HART	No
SOE	No
Redundancy	No
High integrity	No
Intrinsic safety	No
Mechanics	S800

đại lý abb | đại lý 3BSE040662R1

nhà phân phối abb | nhà phân phối 3BSE040662R1

Dữ liệu chi tiết

Environment and certification

Resolution	See table in S800 Modules and Termination Units, 3BSE020924-xxx
Isolation	Groupwise isolated from ground
Error	Error dependent of the field cable resistance: Rerr = R* (0.005 + ∆R/100) Terr°C = Rerr / (R0 * TCR) Terr°F = Terr°C * 1.8
Temperature drift	See table in S800 Modules and Termination Units, 3BSE020924-xxx
Update cycle time	150 + 95 * (number of active channels) ms
CMRR, 50Hz, 60Hz	>120 dB (at 10Ω load)
NMRR, 50Hz, 60Hz	>60 dB
Rated insulation voltage	50 V
Dielectric test voltage	500 V a.c.
Sự thât thoát năng lượng	1.6 W
Current consumption +5 V Modulebus	70 mA
Current consumption +24 V Modulebus	50 mA
Current consumption +24 V external	0

CE mark	Yes
Electrical safety	IEC 61131-2, UL 61010-1, UL 61010-2-201
Hazardous Location	C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2
Marine certification	ABS, BV, DNV-GL, LR
Protection rating	IP20 according to IEC 60529
Corrosive atmosphere ISA-S71.04	G3
Climatic operating conditions	0 to +55 °C (Storage -40 to +70 °C), RH=5 to 95 % no condensation, IEC/EN 61131-2
Pollution degree	Degree 2, IEC 60664-1
Mechanical operating conditions	IEC/EN 61131-2
EMC	EN 61000-6-4 and EN 61000-6-2
Overvoltage categories	IEC/EN 60664-1, EN 50178
Equipment class	Class I according to IEC 61140; (earth protected)
Max ambient temperature	55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F)
RoHS compliance	DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance	DIRECTIVE/2012/19/EU

Brand