Bộ điều khiển SPC600VK01

Thông số kỹ thuật bộ lập trình Abb SPC600VK01
đại lý SPC600VK01 | nhà phân phối SPC600VK01

SCALABLE: SPC6ØØ is optimized for small control applications of up to 500 process I/O

SECURE: S+ systems using SPC6ØØ controllers have been certified to Security Level 1 as defined by IEC 62443

Thông số kỹ thuật chung PLC Abb

Mã đặt hàng	8VZZ001272K1100 (SPC600VK01)
Life cycle status	ACTIVE
Redundancy	No
SIL	No
Tần số đồng hồ	250 MHz
FBs per controller	5000
Closed loop control performance	500 I/O in under 250 msec
XR communications	Up to 50 import + 500 export XR messages per sec
DRAM Bộ nhớ	128 MB RAM
NVRAM	512 KB MRAM
Flash ROM	4 MB Flash ROM
Form factor	Full-size (190mm)
Gắn	Vertical Column
HN800 bus length	305 mm
MTBF (per MIL-HDBK-217-FN2)	SPC6ØØ PR: B = 248,691 hours, VB7Ø5 PR: D = 3,620,095 hours
MTTR (Hours)	SPC6ØØ MTTR = 1 hour, VB7Ø5 MTTR = 8 hours

đại lý abb | đại lý 8VZZ001272K1100 | đại lý SPC600VK01

nhà phân phối abb | nhà phân phối 8VZZ001272K1100 | nhà phân phối SPC600VK01

Dữ liệu chi tiết

Loại bộ xử lý	MCF54418 @ 250 MHz
Module power requirements	3.6 W = 150 mA (typical) @ 24 VDC (+16%/-10%) per module
Module power connection	TB1 on cHBXØ1L
Overvoltage category	Category 1 for power. Tested according to IEC/EN 61010-1
Pin dự phòng tích hợp	No battery required!
Controller switch over time	n/a (requires redundancy)
No. of Segments (or Tasks) per controller	Configurable from 1 (min & typical) to 8 (max)
Segment (or Task) cycle time	Configurable from 1 msec (min), 250 msec (default / typical), 30 sec (max)
No. of FBs per Segment (or Task)	Min 2 FBs per segment, Max 5000 FBs per segment, 5000 FBs Total per controller
Max no. of local SD Series IO modules	60
Max no. of remote IO links per controller	4
Max no. of SD Series IO modules	Up to 60 IO modules per remote IO link, 120 IO modules Total
Max no. of HR Series IO modules	Not supported
Max no. of local HN800 IO modules	Up to 10 vertical bus segments (columns) each column with up to 8 full-size or 12 compact modules, 64 modules Total
Max length of electrical HN800 bus	Up to 30 meters (includes module bases + cables that connect segments)
Max length of optical HN800 bus	Up to 3000 meters using 62.5/125 µm multi-mode fiber optic cable with cRBXØ1 F.O. repeater modules
PN800 Plant Network capacity	Up to 250 network segments per system, up to 250 nodes per segment
Controller PN800 node address	SPCxxx controller node address must be an even number between 2 and 248
Giao thức mạng điều khiển	PN800 Plant Network a.k.a “INFI-Net over Ethernet” based on Ethernet TCP
Đường trục mạng điều khiển được đề xuất	100 MBps or 1.0 GBps Ethernet TCP
Độ ổn định của đồng hồ thời gian thực	50 ppm (clock is re-synchronized every 2 sec)
Standard time precision	10-20 msec via time master node on PN800 Plant Network
Enhanced time precision	1 msec via time master on dedicated SNTP network (EN 2A)
PROFIBUS capability	124 PROFIBUS Slaves via (1) pair of PDP800 master modules
HART (v5.4) capacity	500 HART signals via SD Series IO modules
IEC 61850 capability	20 IEDS via (1) CI850 module
IEC 60870-5-104	32 Devices, 1500 Total Points via (2) SCI200 modules
DNP 3.0	Up to 32 Outstations via (2) SCI200 modules
DeviceNet	Ethernet IP (via SCI200) to DeviceNet adaptor
MODBUS TCP	1 Server, 4 Clients, 500 Total Points