Bộ điều khiển SPC800K01

Thông số kỹ thuật bộ lập trình Abb SPC800K01
đại lý SPC800K01 | nhà phân phối SPC800K01

SCALABLE: SPC8ØØ is optimized for medium-sized control applications of up to 5000 process I/O

SECURE: S+ systems using SPC8ØØ controllers have been certified to Security Level 1 as defined by IEC 62443

Thông số kỹ thuật chung PLC Abb

Mã đặt hàng	8VZZ001954K0100 (SPC800K01)
Life cycle status	ACTIVE
Redundancy	No
SIL	No
Tần số đồng hồ	250 MHz
FBs per controller	30000
Closed loop control performance	5000 I/O in under 250 msec
XR communications	Up to 300 import + 3000 export XR messages per sec
DRAM Bộ nhớ	128 MB RAM
NVRAM	2.0 MB MRAM
Flash ROM	4 MB Flash ROM
Form factor	Full-size (190mm)
Gắn	Horizontal Row
HN800 bus length	150 mm
MTBF (per MIL-HDBK-217-FN2)	SPC8ØØ PR: C = 248,779 hours, MB7Ø5 PR: C = 1,576,127 hours
MTTR (Hours)	SPC8ØØ MTTR = 1 hour, MB7Ø5 MTTR = 8 hours

đại lý abb | đại lý 8VZZ001954K0100 | đại lý SPC800K01

nhà phân phối abb | nhà phân phối 8VZZ001954K0100 | nhà phân phối SPC800K01

Dữ liệu chi tiết

Loại bộ xử lý	MCF54418 @ 250 MHz
Module power requirements	3.6 W = 150 mA (typical) @ 24 VDC (+16%/-10%) per module
Module power connection	TB1 on cHBXØ1L
Overvoltage category	Category 1 for power. Tested according to IEC/EN 61010-1
Pin dự phòng tích hợp	No battery required!
Controller switch over time	n/a (requires redundancy)
No. of Segments (or Tasks) per controller	Configurable from 1 (min & typical) to 8 (max)
Segment (or Task) cycle time	Configurable from 1 msec (min), 250 msec (default / typical), 30 sec (max)
No. of FBs per Segment (or Task)	Min 2 FBs per segment, Max 10000 FBs per segment, 10000 FBs Total per controller
Max no. of local SD Series IO modules	60
Max no. of remote IO links per controller	8
Max no. of SD Series IO modules	Up to 60 IO modules per remote IO link, 240 IO modules Total
Max no. of HR Series IO modules	Up to 128 HR IO modules via 2 pairs of RIO22 modules
Max no. of local HN800 IO modules	Up to 8 horizontal bus segments (rows) each row with up to 12 modules, 64 modules Total
Max length of electrical HN800 bus	Up to 30 meters (includes module bases + cables that connect segments)
Max length of optical HN800 bus	Up to 3000 meters using 62.5/125 µm multi-mode fiber optic cable with cRBXØ1 F.O. repeater modules
PN800 Plant Network capacity	Up to 250 network segments per system, up to 250 nodes per segment
Controller PN800 node address	SPCxxx controller node address must be an even number between 2 and 248
Giao thức mạng điều khiển	PN800 Plant Network a.k.a “INFI-Net over Ethernet” based on Ethernet TCP
Đường trục mạng điều khiển được đề xuất	100 MBps or 1.0 GBps Ethernet TCP
Độ ổn định của đồng hồ thời gian thực	50 ppm (clock is re-synchronized every 2 sec)
Standard time precision	10-20 msec via time master node on PN800 Plant Network
Enhanced time precision	1 msec via time master on dedicated SNTP network (EN 2A)
PROFIBUS capability	992 PROFIBUS Slaves via (8) pairs of PDP800 master modules
HART (v5.4) capacity	2000 HART signals via SD Series IO modules
IEC 61850 capability	16 IEDS via (8) CI850 modules
IEC 60870-5-104	128 Devices, 1500 Total Points via (8) SCI200 modules
DNP 3.0	Up to 128 Outstations via (8) SCI200 modules
DeviceNet	Ethernet IP (via SCI200) to DeviceNet adaptor
MODBUS TCP	8 Servers, 128 Clients, 10000 Total Points