Mô đun Abb AIS885

Thông số kỹ thuật module Abb AIS885
đại lý AIS885 | nhà phân phối AIS885

• Signal range: 4…20 mA
• Certified for Functional safety
• Internal hardware supervision
• Device malfunction low, under range, over range and device malfunction high
  detection
• Primary (P)
• Thông số kỹ thuật chung module truyền thông Abb

  Mã đặt hàng	3BSE080108R1
  Type	Analog Input Module, SIL3
  Số kênh	1
  Signal specification	4…20 mA 1.2 A field power
  HART	Yes
  Detailed HART information	HART v7, HART pass-through and HART variables to the application
  SOE	N/A
  Redundancy	Yes
  Hot swap	Yes
  High integrity	Yes
  Intrinsic safety	No
  Mechanics	Select I/O

đại lý abb | đại lý 3BSE080108R1

nhà phân phối abb | nhà phân phối 3BSE080108R1

• Dữ liệu chi tiết

  Supported field devices	2-wire (loop powered transmitters), 3-wire (transmitters powered by SCM), 4-wire (transmitters powered by SCM)
  Isolation	Galvanic isolation to system. Routine tested at factory with 3060 V DC.
  Field power	Current limited (configurable)
  Accuracy	0.1 %
  Resolution	16 bit A/D converter
  Diagnostics	Loop supervision (open circuit and short circuit) Device malfunction low, under range, over range, and device malfunction high Internal hardware supervision Communication supervision Internal power supervision Power injection supervision
  Calibration	Factory calibration
  Sự thât thoát năng lượng	0.65 W
  Installation in Hazardous Area/Locations	Yes/Yes (on IPA)
  IS barrier	No
  Field Input Robustness	±35 V between all terminals
  Input voltage range	19.2…30 V
  Input impedance	250 ohm

• Kích thước

  Độ rộng	77.9 mm
  Chiều sâu	105 mm
  Độ cao	9.8 mm
  Cân nặng (including base)	73 g