Bộ điều khiển SPC700VK01
Thông số kỹ thuật bộ lập trình Abb SPC700VK01
đại lý SPC700VK01 | nhà phân phối SPC700VK01
Thông số kỹ thuật chung PLC Abb
| Mã đặt hàng | SPC700VK01 |
| Life cycle status | ACTIVE |
| Redundancy | No |
| SIL | No |
| Tần số đồng hồ | 250 MHz |
| FBs per controller | 10000 |
| Closed loop control performance | 1000 I/O in under 250 msec |
| XR communications | Up to 100 import + 1000 export XR messages per sec |
| DRAM Bộ nhớ | 128 MB RAM |
| NVRAM | 512 KB MRAM |
| Flash ROM | 4 MB Flash ROM |
| Form factor | Full-size (190mm) |
| Gắn | Vertical Column |
| HN800 bus length | 305 mm |
| MTBF (per MIL-HDBK-217-FN2) | SPC7ØØ PR: D = 180,930 hours, VB7Ø5 PR: D = 3,620,095 hours |
| MTTR (Hours) | SPC7ØØ MTTR = 1 hour, MB7Ø5 MTTR = 8 hours |
đại lý abb | đại lý SPC700VK01
nhà phân phối abb | nhà phân phối SPC700VK01
Dữ liệu chi tiết
| Loại bộ xử lý | MCF54418 @ 250 MHz |
| Module power requirements | 3.6 W = 150 mA (typical) @ 24 VDC (+16%/-10%) per module |
| Module power connection | TB1 on cHBXØ1L |
| Overvoltage category | Category 1 for power. Tested according to IEC/EN 61010-1 |
| Pin dự phòng tích hợp | No battery required! |
| Controller switch over time | n/a (requires redundancy) |
| No. of Segments (or Tasks) per controller | Configurable from 1 (min & typical) to 8 (max) |
| Segment (or Task) cycle time | Configurable from 1 msec (min), 250 msec (default / typical), 30 sec (max) |
| No. of FBs per Segment (or Task) | Min 2 FBs per segment, Max 10000 FBs per segment, 10000 FBs Total per controller |
| Max no. of local SD Series IO modules | 60 |
| Max no. of remote IO links per controller | 8 |
| Max no. of SD Series IO modules | Up to 60 IO modules per remote IO link, 240 IO modules Total |
| Max no. of HR Series IO modules | Up to 128 HR IO modules via 2 pairs of RIO22 modules |
| Max no. of local HN800 IO modules | Up to 10 vertical bus segments (columns) each column with up to 8 full-size or 12 compact modules, 64 modules Total |
| Max length of electrical HN800 bus | Up to 30 meters (includes module bases + cables that connect segments) |
| Max length of optical HN800 bus | Up to 3000 meters using 62.5/125 µm multi-mode fiber optic cable with cRBXØ1 F.O. repeater modules |
| PN800 Plant Network capacity | Up to 250 network segments per system, up to 250 nodes per segment |
| Controller PN800 node address | SPCxxx controller node address must be an even number between 2 and 248 |
| Giao thức mạng điều khiển | PN800 Plant Network a.k.a “INFI-Net over Ethernet” based on Ethernet TCP |
| Đường trục mạng điều khiển được đề xuất | 100 MBps or 1.0 GBps Ethernet TCP |
| Độ ổn định của đồng hồ thời gian thực | 50 ppm (clock is re-synchronized every 2 sec) |
| Standard time precision | 10-20 msec via time master node on PN800 Plant Network |
| Enhanced time precision | 1 msec via time master on dedicated SNTP network (EN 2A) |
| PROFIBUS capability | 248 PROFIBUS Slaves via (2) pairs of PDP800 master modules |
| HART (v5.4) capacity | 1000 HART signals via SD Series IO modules |
| IEC 61850 capability | 80 IEDS via (4) CI850 modules |
| IEC 60870-5-104 | 64 Devices, 1500 Total Points via (4) SCI200 modules |
| DNP 3.0 | Up to 64 Outstations via (4) SCI200 modules |
| DeviceNet | Ethernet IP (via SCI200) to DeviceNet adaptor |
| MODBUS TCP | 4 Servers, 50 Clients, 1500 Total Points |
Kích thước
| Độ rộng | 66 mm |
| Độ cao | 218 mm |
| Chiều sâu | 138 mm |
| Cân nặng (including base) | 572 g |
