Mô đun Abb AI810
Thông số kỹ thuật module đầu vào Abb AI810
đại lý AI810 | nhà phân phối AI810
- 1 group of 8 channels isolated from ground
- Input shunt resistors protected to 30 V by PTC resistor
-
Thông số kỹ thuật chung module truyền thông Abb
Mã đặt hàng 3BSE008516R1 Type Analog Input Signal specification 0..20mA, 4..20mA, 0..10V, 2..10V Số kênh 8 Signal type Unipolar single ended HART No SOE No Redundancy No High integrity No Intrinsic safety No Mechanics S800
đại lý abb | đại lý 3BSE008516R1
nhà phân phối abb | nhà phân phối 3BSE008516R1
-
Dữ liệu chi tiết
Resolution 12 bit Input impedance 290 kΩ (voltage input)
230 – 275 kΩ (current input)Isolation Groupwise isolated from ground Under/over range -5% / +15% Error Max. 0.1% Temperature drift Voltage: Typ. 70 ppm/°C Max. 100 ppm/°C; Current: Typ. 50 ppm/°C Max. 80 ppm/°C Input filter (rise time 0-90%) 140 ms Update cycle time 8 ms Current limiting Transmitter power can be current limited by the MTU Maximum field cable length 600 meters (656 yards) Max input voltage (non destructive) 30 V d.c. NMRR, 50Hz, 60Hz > 40 dB Rated insulation voltage 50 V Dielectric test voltage 500 V a.c. Sự thât thoát năng lượng 1.5 W Current consumption +5 V Modulebus 70 mA Current consumption +24 V Modulebus 40 mA Current consumption +24 V external 0 -
Environment and certification
CE mark Yes Electrical safety IEC 61131-2, UL 61010-1, UL 61010-2-201 Hazardous Location C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2 Marine certification ABS, BV, DNV-GL, LR Protection rating IP20 according to IEC 60529 Corrosive atmosphere ISA-S71.04 G3 Climatic operating conditions 0 to +55 °C (Storage -40 to +70 °C), RH=5 to 95 % no condensation, IEC/EN 61131-2 Pollution degree Degree 2, IEC 60664-1 Mechanical operating conditions IEC/EN 61131-2 EMC EN 61000-6-4, EN 61000-6-2 Overvoltage categories IEC/EN 60664-1, EN 50178 Equipment class Class I according to IEC 61140; (earth protected) Max ambient temperature 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F) RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012) WEEE compliance DIRECTIVE/2012/19/EU