Mô đun Abb AIS810

Thông số kỹ thuật module Abb AIS810
đại lý AIS810 | nhà phân phối AIS810

Signal range: 4…20 mA and 0…20 mA

Transmitter power current limited to 30 mA

Hardware error supervision

Device malfunction low, under range, over range and device malfunction high detection

Cyclic read of up to two HART Device Variables

Thông số kỹ thuật chung module truyền thông Abb

Mã đặt hàng	3BSE078762R1
Type	Analog Input Module
Số kênh	1
Signal specification	4…20 mA 0…20 mA
HART	Yes
Detailed HART information	HART v7, HART pass-through and HART variables to the application
SOE	N/A
Redundancy	Yes
Hot swap	Yes
High integrity	No
Intrinsic safety	No
Mechanics	Select I/O

đại lý abb | đại lý 3BSE078762R1

nhà phân phối abb | nhà phân phối 3BSE078762R1

Dữ liệu chi tiết

Kích thước

Supported field devices	2-wire and 4-wire devices (external power required for 4-wire devices)
Isolation	Galvanic isolation to system and between each channel (including field power). Routine tested at factory with 3060 VDC.
Field power	Current limited to 30 mA
Accuracy	0.1 %
Resolution	16-bit A/D converter
Diagnostics	Loop supervision (open circuit and short circuit) Device malfunction low, under-range, over-range, and device malfunction high Internal hardware supervision Communication supervision Internal power supervision
Calibration	Factory calibration
Sự thât thoát năng lượng	0.62 W at 20 mA
Installation in Hazardous Area/Locations	Yes/Yes
IS barrier	No
Field Input Robustness	±35 V between all terminals
Input impedance	250 ohm

Brand