Mô đun Abb AO895
Thông số kỹ thuật module đầu ra tương tự Abb AO895
đại lý AO895 | nhà phân phối AO895
Thông số kỹ thuật chung module truyền thông Abb
Mã đặt hàng | 3BSC690087R1 |
Type | Analog Output |
Signal specification | 4…20 mA |
Số kênh | 8 |
Signal type | Unipolar single ended |
HART | Yes |
SOE | No |
Redundancy | No |
High integrity | No |
Intrinsic safety | Yes |
Mechanics | S800 |
đại lý abb | đại lý 3BSC690087R1
nhà phân phối abb | nhà phân phối 3BSC690087R1
Dữ liệu chi tiết
Resolution | 12 bit |
Isolation | Groupwise isolated from ground |
Under/over range | 2.5 / 22.4mA |
Output load | |
Error | Typ. 0.05%, Max. 0.1% at 650 ohms |
Temperature drift | Typ. 50 ppm/°C, Max. 100 ppm/°C |
Rise Time | 30 ms (10% to 90%) |
Current limiting | Short circuit proof current limited output |
Rated insulation voltage | 50 V |
Dielectric test voltage | 500 V a.c. |
Sự thât thoát năng lượng | 4.25 W |
Current consumption +5 V Modulebus | Typ. 130 mA |
Current consumption +24 V external | Typ. 250 mA, Max. |
Environment and certification
CE mark | Yes |
Electrical safety | IEC 61131-2, cFMus |
Hazardous Location | ATEX/IECEx Zone 2 with interface to Zone 0, cFMus C1, Div 2/Zone 2 with interface to C1, C2, C3 Div 1/Zone 0 |
Marine certification | – |
Protection rating | IP20 according to IEC 60529 |
Corrosive atmosphere ISA-S71.04 | G3 |
Climatic operating conditions | 0 to +55 °C (Storage -40 to +70 °C), RH=5 to 95 % no condensation, IEC/EN 61131-2 |
Pollution degree | Degree 2, IEC 60664-1 |
Mechanical operating conditions | IEC/EN 61131-2 |
EMC | EN 61000-6-4 and EN 61000-6-2 |
Overvoltage categories | IEC/EN 60664-1, EN 50178 |
Equipment class | Class I according to IEC 61140; (earth protected) |
Max ambient temperature | 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F) |
RoHS compliance | DIRECTIVE/2011/65/EU (EN 50581:2012) |
WEEE compliance | DIRECTIVE/2012/19/EU |