Mô đun Abb AO810V2
Thông số kỹ thuật module đầu ra tương tự Abb AO810V2
đại lý AO810V2 | nhà phân phối AO810V2
Thông số kỹ thuật chung module truyền thông Abb
Mã đặt hàng | 3BSE038415R1 |
Type | Analog Output |
Signal specification | 0..20 mA, 4..20 mA |
Số kênh | 8 |
HART | No |
SOE | No |
Redundancy | No |
High integrity | No |
Intrinsic safety | No |
Mechanics | S800 |
đại lý abb | đại lý 3BSE038415R1
nhà phân phối abb | nhà phân phối 3BSE038415R1
Dữ liệu chi tiết
Resolution | 14 bit |
Isolation | Groupwise isolated from ground |
Under/over range | – / +15% |
Output load | ≤ 500 Ω (supply connected to L1+ only) 250 – 850 Ω (with supply connected L2+ only) |
Error | Max. 0.1% at 0 – 500 ohms (current) |
Temperature drift | Typ. 30 ppm/°C, Max 60 ppm/°C |
Rise Time | 0.35 ms (PL = 500 Ω) |
Update cycle time | ≤ 2ms |
Current limiting | Short circuit proof current limited output |
Maximum field cable length | 600 meters (656 yards) |
Rated insulation voltage | 50 V |
Dielectric test voltage | 500 V a.c. |
Sự thât thoát năng lượng | 2.3 W |
Current consumption +5 V Modulebus | Max 70 mA |
Current consumption +24 V Modulebus | 0 |
Current consumption +24 V external | 245 mA |
Environment and certification
CE mark | Yes |
Electrical safety | IEC 61131-2, UL 61010-1, UL 61010-2-201 |
Hazardous Location | C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2 |
Marine certification | ABS, BV, DNV-GL, LR |
Protection rating | IP20 according to IEC 60529 |
Corrosive atmosphere ISA-S71.04 | G3 |
Climatic operating conditions | 0 to +55 °C (Storage -25 to +70 °C), RH=5 to 95 % no condensation, IEC/EN 61131-2 |
Pollution degree | Degree 2, IEC 60664-1 |
Mechanical operating conditions | IEC/EN 61131-2 |
EMC | EN 61000-6-4 and EN 61000-6-2 |
Overvoltage categories | IEC/EN 60664-1, EN 50178 |
Equipment class | Class I according to IEC 61140; (earth protected) |
Max ambient temperature | 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F) |
RoHS compliance | DIRECTIVE/2011/65/EU (EN 50581:2012) |
WEEE compliance | DIRECTIVE/2012/19/EU |