Mô đun ABB DO02
Thông số kỹ thuật module Abb DO02
đại lý DO02 | nhà phân phối DO02
Thông số kỹ thuật module Abb
Mã đặt hàng | DO02 |
Kiểu | Digital Output |
Life cycle status | ACTIVE |
Số kênh | 16 |
Signal type | DO |
HART | No |
SOE | No |
Redundancy | No |
Form factor | Standard (190 mm) |
Gắn | Horizontal Row or Vertical Column |
MTBF (per MIL-HDBK-217-FN2) | PR A: 131,490 Hours |
MTTR (Hours) | 1 Hours |
đại lý abb | đại lý DO02
nhà phân phối abb | nhà phân phối DO02
Dữ liệu chi tiết
Module power requirements | 24 VDC ± 10%, 65 mA typical, 73 mA max |
Module power connection | POWER TB on cHBXØ1L or VBXØ1T |
Field IO power | Up to 250 mA per CH @ 24- 48 VDC ±10% |
Field IO Power, Digital Outputs | max 250 mADC @ 24 to 48 VDC |
Overvoltage category | Category I for power, inputs or outputs. Tested according to EN 61010-1 |
Max field cable length | 600 meters (1968 feet) |
Number of Channels | 16 Open-Collector Transistor Type Digital Outputs |
Signal ranges and types | Digital Outputs: Max 250 mA @ 24 to 48 VDC |
Field signal to Logic isolation | Galvanically isolated, 1500 V up to 1 minute |
Channel isolation | Individual CH-2-CH isolated, 1500 V up to 1 minute |
Environment and certification
Temperature, Operating | -40 to +70 °C Tested according to IEC/EN 60068-2-1, IEC/EN 60068-2-2 |
Temperature, Storage | -40 to +85 °C Tested according to MIL-STD-810G |
Relative humidity | 20% to 95% @ 40°C non-condensing. Tested according to IEC/EN 60068-2-78, IEC/EN 61298-3 |
Vibration (operational sinusoidal) | 5 to 60 Hz 0.137 mm (0.0054 in.), 60 to 150 Hz 1.0 G. Tested according to IEC/EN 60068-2-6 |
Vibration (transportation) | 10 to 500 Hz. Tested according to MIL-STD-810G |
Shock (storage) | 15 G, 11 msec. Tested according to IEC/EN 60068-2-27 |
Drop | 100 mm. Tested according to IEC/EN 60068-2-31 |
Protection class | IP20 according to EN 60529, IEC 529 |
Altitude (operational) | Sea level to 3,048 meters (10,000 ft.) Tested according to MIL-STD-810G |
Altitude (storage) | Sea level to 12,192 meters (40,000 ft.) Tested according to MIL-STD-810G |
Air quality | ISA S71.04 G1, ISA S71.04 G3 compliant versions SPCxxxA are also available |
ESD immunity | Tested according to IEC/EN 61000-6-2, IEC/EN 61000-4-2, Severity level 3 |
Surge immunity | Tested according to IEC/EN 61000-6-2, IEC/EN 61000-4-5, Severity level 3 |
Electrical fast transient immunity | Tested according to IEC/EN 61000-6-2, IEC/EN 61000-4-4, Severity level 3 |
Radiated RFI immunity | Tested according to IEC/EN 61000-6-2, IEC/EN 61000-4-3, Severity level 3 |
Conducted Immunity | Tested according to IEC/EN 61000-6-2, IEC/EN 61000-4-6, Severity level 3 |
Magnetic field immunity | Tested according to IEC/EN 61000-6-2, IEC/EN 61000-4-8, Severity level 4 |
Radiated emission | Tested accTested according to IEC/EN 61000-6-4, CISPR 11 + A1, CISPR 16-1-1, Group 1, Class A, ISM equipmentording to IEC/EN 61000-6-2, IEC/EN 61000-4-6, Severity level 3 |
Conducted emission | Tested according to IEC/EN 61000-6-4, CISPR 11 + A1, CISPR 16-1-1, Group 1, Class A, ISM equipment |
Voltage dips and interruption immunity | Tested according to IEC/EN 61000-6-2, IEC/EN 61000-4-11 |
CSA non-hazardous locations | Certified for use as process control equipment in an ordinary (non-hazardous) location |
CSA hazardous, nonincendive locations | Class I, Division 2, Groups A, B, C, D |
CE Mark | CE Mark EMC directive 2004/108/EC & Low Voltage Directive 2006/95/EC |
RoHS compliance | RoHS Directive 2015/863 |
WEEE compliance | DIRECTIVE/2012/19/EU |