Bộ điều khiển SPC810ev2K02

Thông số kỹ thuật bộ lập trình SPC810ev2K02
đại lý SPC810ev2K02 | nhà phân phối SPC810ev2K02

• SCALABLE: SPC81Øev2K02 is optimized for medium-sized control applications of up to 5000 process I/O
• SECURE: S+ systems using SPC81Øev2K02 controllers have been certified to Security Level 1 as defined by IEC 62443
• Thông số kỹ thuật chung PLC Abb

  Mã đặt hàng	7PAA006320R1200 (SPC81Øev2K02)
  Life cycle status	ACTIVE
  Redundancy	Yes
  SIL	No
  Tần số đồng hồ	250 MHz
  FBs per controller	30000
  Closed loop control performance	5000 I/O in under 250 msec
  XR communications	Up to 300 import + 3000 export XR messages per sec
  DRAM Bộ nhớ	128 MB RAM
  NVRAM	2.0 MB MRAM
  Flash ROM	4 MB Flash ROM
  Form factor	HR Module
  Gắn	HR (1-Slot in MMU)
  HN800 bus length	355 mm
  MTBF (per MIL-HDBK-217-FN2)	SPC81Øev PR: D = 230,7107 hours @ 40 °C
  MTTR (Hours)	SPC81Øev2K02 MTTR = 1 hour

đại lý abb | đại lý 7PAA006320R1200 | đại lý SPC81Øev2K02

nhà phân phối abb | nhà phân phối 7PAA006320R1200 | nhà phân phối SPC81Øev2K02

• Dữ liệu chi tiết

  Loại bộ xử lý	MCF54418 @ 250 MHz
  Module power requirements	4.125 W = 850 mA (typical) @ 5 VDC per module & PBA811
  Module power connection	+5v connection on MMU
  Overvoltage category	Category 1 for power. Tested according to IEC/EN 61010-1
  Pin dự phòng tích hợp	No battery required!
  Controller switch over time	1 controller scan cycle
  No. of Segments (or Tasks) per controller	Configurable from 1 (min & typical) to 8 (max)
  Segment (or Task) cycle time	Configurable from 1 msec (min), 250 msec (default / typical), 30 sec (max)
  No. of FBs per Segment (or Task)	Min 2 FBs per segment, Max 30000 FBs per segment, 30000 FBs Total per controller
  Max no. of local SD Series IO modules	n/a
  Max no. of remote IO links per controller	n/a
  Max no. of SD Series IO modules	n/a
  Max no. of local HN800 IO modules	n/a
  Max length of electrical HN800 bus	n/a
  Max length of optical HN800 bus	n/a
  PN800 Plant Network capacity	Up to 250 network segments per system, up to 250 nodes per segment
  Controller PN800 node address	SPCxxx controller node address must be an even number between 2 and 248
  Giao thức mạng điều khiển	PN800 Plant Network a.k.a “INFI-Net over Ethernet” based on Ethernet TCP
  Đường trục mạng điều khiển được đề xuất	100 MBps or 1.0 GBps Ethernet TCP
  Độ ổn định của đồng hồ thời gian thực	50 ppm (clock is re-synchronized every 2 sec)
  Standard time precision	10-20 msec via time master node on PN800 Plant Network
  Enhanced time precision	1 msec via time master on dedicated SNTP network (EN 2A)
  PROFIBUS capability	992 PROFIBUS Slaves via (2) pairs of PDP800 master modules
  HART (v5.4) capacity	2000 HART signals via SD Series IO modules
  IEC 61850 capability	16 IEDS via (8) CI850 modules
  IEC 60870-5-104	128 Devices, 1500 Total Points via (8) SCI200 modules
  DNP 3.0	Up to 128 Outstations via (8) SCI200 modules
  DeviceNet	Ethernet IP (via SCI200) to DeviceNet adaptor
  MODBUS TCP	8 Servers, 128 Clients, 10000 Total Points

• Kích thước

  Độ rộng	35.6 mm (1.06 in.)
  Độ cao	177.8 mm (7.0 in.)
  Chiều sâu	298.5 mm (11.75 in.)
  Cân nặng (including base)	1.00 kg (35.27 oz.)