Bộ điều khiển SPC810ev1K02

Thông số kỹ thuật bộ lập trình Abb SPC810ev1K02
đại lý SPC810ev1K02 | nhà phân phối SPC810ev1K02

SCALABLE: SPC81Øev1K02 is optimized for medium-sized control applications of up to 5000 process I/O
SECURE: S+ systems using SPC81Øev1K02 controllers have been certified to Security Level 1 as defined by IEC 62443

Thông số kỹ thuật chung PLC Abb

Mã đặt hàng	7PAA006320R0200 (SPC81Øev1K02)
Life cycle status	ACTIVE
Redundancy	Yes
SIL	No
Tần số đồng hồ	250 MHz
FBs per controller	30000
Closed loop control performance	5000 I/O in under 250 msec
XR communications	Up to 300 import + 3000 export XR messages per sec
DRAM Bộ nhớ	128 MB RAM
NVRAM	2.0 MB MRAM
Flash ROM	4 MB Flash ROM
Form factor	HR Module
Gắn	HR (1-Slot in MMU)
HN800 bus length	355 mm
MTBF (per MIL-HDBK-217-FN2)	SPC81Øev PR: D = 230,7107 hours @ 40 °C
MTTR (Hours)	SPC81Øev1K02 MTTR = 1 hour

đại lý abb | đại lý 7PAA006320R0200 | đại lý SPC81Øev1K02

nhà phân phối abb | nhà phân phối 7PAA006320R0200 | nhà phân phối SPC81Øev1K02

Dữ liệu chi tiết

Loại bộ xử lý	MCF54418 @ 250 MHz
Module power requirements	4.125 W = 850 mA (typical) @ 5 VDC per module & PBA811
Module power connection	+5v connection on MMU
Overvoltage category	Category 1 for power. Tested according to IEC/EN 61010-1
Pin dự phòng tích hợp	No battery required!
Controller switch over time	1 controller scan cycle
No. of Segments (or Tasks) per controller	Configurable from 1 (min & typical) to 8 (max)
Segment (or Task) cycle time	Configurable from 1 msec (min), 250 msec (default / typical), 30 sec (max)
No. of FBs per Segment (or Task)	Min 2 FBs per segment, Max 30000 FBs per segment, 30000 FBs Total per controller
Max no. of local SD Series IO modules	60
Max no. of remote IO links per controller	8
Max no. of SD Series IO modules	Up to 60 IO modules per remote IO link, 240 IO modules Total
Max no. of HR Series IO modules	Up to 64 Local HR IO modules + 64 Remote HR IO modules via RIO22
Max no. of local HN800 IO modules	Up to 10 vertical bus segments (columns) each column with up to 8 full-size or 12 compact modules, 64 modules Total
Max length of electrical HN800 bus	Up to 30 meters (includes module bases + cables that connect segments)
Max length of optical HN800 bus	Up to 3000 meters using OM1 62.5/125 µm multi-mode fiber optic cable with cRBXØ1 F.O. repeater modules
PN800 Plant Network capacity	Up to 250 network segments per system, up to 250 nodes per segment
Controller PN800 node address	SPCxxx controller node address must be an even number between 2 and 248
Giao thức mạng điều khiển	PN800 Plant Network a.k.a “INFI-Net over Ethernet” based on Ethernet TCP
Đường trục mạng điều khiển được đề xuất	100 MBps or 1.0 GBps Ethernet TCP
Độ ổn định của đồng hồ thời gian thực	50 ppm (clock is re-synchronized every 2 sec)
Standard time precision	10-20 msec via time master node on PN800 Plant Network
Enhanced time precision	1 msec via time master on dedicated SNTP network (EN 2A)
PROFIBUS capability	992 PROFIBUS Slaves via (2) pairs of PDP800 master modules
HART (v5.4) capacity	2000 HART signals via SD Series IO modules
IEC 61850 capability	16 IEDS via (8) CI850 modules
IEC 60870-5-104	128 Devices, 1500 Total Points via (8) SCI200 modules
DNP 3.0	Up to 128 Outstations via (8) SCI200 modules
DeviceNet	Ethernet IP (via SCI200) to DeviceNet adaptor
MODBUS TCP	8 Servers, 128 Clients, 10000 Total Points